×

About

Orchard Management General Trading Company is a dynamic enterprise committed to excellence in diversified trade. Specializing in fertilizers, construction materials, minerals, and petrochemicals, we offer high-quality products that fuel agricultural growth, robust construction, industrial progress, and technological innovation. Our commitment is to deliver top-notch solutions, driving success across industries.

  • +447429537935
menu

Category: LLDPE

  1. Homepage
  2. LLDPE
LLDPE

HD5000S

HDPE for

HD5000S is a HDPE grade specially designed for monofilament applications, which combines good processability with high tenacity. This grade has good balance of mechanical strength and high production rates. HD5000S is also well suited for multiply applications, like ropes and stretched filaments.

Jamlene: HD5000S

Characteristic Properties

good processability with high tenacity
Good balance of Mechanical strength and high production rates

Density: 0.950 – 0.956

Main Applications

Fishing net, Rope
Agricultural net, Tarpaulin

Density: 0.950 – 0.956

Additives

Antioxidants/Acid scavenger
Processing aid

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190°C/ 2.16Kg)

g/10 min

0.8

D1238

Density

g/cm³

0.953

D1505

Thermal Properties

Unit

Value

Test Method

Vicat Softening Point

°C

125

D1525

Molded Properties

Unit

Value

Test Method

Flectural Modulus

MPa

1100

D790

Tensile Strength at Yield

MPa

24

D790

Tensile Strength at Break

Mpa

39

D638

H.D.T

°C

75

D648

Notched Izod Impact @ 23 °C

J/m

400

D256/A
LLDPE

HD60505

LLDPE made via Spherilene Gas-Phase Technology

60505 is a HDPE injection molding grade which combines high stiffness with good physical properties. This resin is well suited for crates and toys applications.

HDPE: HD60505 | HD60505UV

Characteristic Properties

High stiffness with good physical properties.

Density: 0.956 – 0.960

Main Applications

Injection molding grade
Crates

Density: 0.956 – 0.960

Additives

60505
Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
60505UV
Catalyst neutralizer (acid scavenger, lubricant)

 

Resin Properties

Unit

Typical Value

ASTM Method

Melt Index (190°C/ 2.16Kg)

g/10 min

5.5

D1238

Density

g/ml

0.958

D1505

Physical properties @

Flexural modulus

MPa

1460

D790

Notched Izod impact at 23°C

J/m

30

D256/A

Vicat softening point

°C

125

D1525

@ on compression moulded specimen obtained according to ASTM D 1928°C

Fabrication conditions for injection moulding

Recommended barrel temperatures range between 190 and 280°C
LLDPE

HD60507

LLDPE made via Spherilene Gas-Phase Technology

60507 is a HDPE homopolymer which is manufactured in gas phase process for injection molding grade which combines good flowability with balanced physical properties. This resin is well suited for general purpose application requiring high stiffness.

HDPE: HD60507 | HD60507UV

Characteristic Properties

Good flowability with balanced phisycal properties.

Density: 0.956 – 0.962

Main Applications

Crates
Injection molding

Density: 0.956 – 0.962

Additives

HD-60507
Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
HD-60507UV
Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
UV Stabilizer

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190°C/ 2.16Kg)

g/10 min

7.5

D1238

Density

g/ml

0.958

D1505

Resin Properties @

Unit

Typical Value

Test Method

Vicat Softening Point

°C

126.5

D1525

Moulded Properties @

Unit

Typical Value

Test Method

Flexural Modulus

MPa

1450

D790

Notched Izod Impact @ 23 °C

J/m

24

D256/A
LLDPE

HPLL18X

LLDPE made via Spherilene Gas-Phase Technology

HP-LL18XF5 N is a termopolymer of ethylene, propylene and butene-1 for high Strength application especially heavy duty shipping sacks, ice bag, frozen food bags, potato bags and agriculture films which have good sealability and excellent puncture resistance. Goods produced from this grade have outstanding toughness, excellent puncture resistance, good heat sealing behavior and excellent machinability on conversion lines. HPLLDPE’s process is easier than conventional LLDPEs and have low gel. HPLL18XF5 N is a grade without slip additives.

HP-LLDPE: LL18XF5N

Characteristic Properties

Exellent punctuer resistance.
Exellent machinability on conversion lines.

Density: 0.918 – 0.922

Main Applications

T-bags and other bags
Food Packaging for frozen products, Agricultural
Film, Heat seal film, Food Packaging

Density: 0.918 – 0.922

Additives

Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
Antiblocking Agent

 

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190°C/ 2.16Kg)

g/10 min

0.5

D1238

Density

g/cm³

0.918

D1505

Film properties @

Dart Impact

g

125

D1709

Vicat Softening Point

°C

127

D1525

Tensile Strength at yield

MPa

(MD/TD)

11/10

D638

Tensile Strength at break

MPa

(MD/TD)

40/35

D638

Ultimate elongation

%

(MD/TD)

600/750

D638

Elmendorf Tear

g

(MD/TD)

240/400

D1922

Haze

%

30

D1003

Gloss 45°

25

D2457

@ 25 micron film obtained on Collin 25, B.u.R. 2.5: 1, Temp. profile 155 190 °C: melt 200 °C
LLDPE

CC52502

Caps and Closures (Mineral)

CC52502 is a Narrow MWD HDPE specially designed for mineral water bottles and beverage caps. This grade has excellent organoleptic properties which prevent unpleasant odor and taste from cap or closure to transfer to water. It has good gas permeability characteristics, superior processability and excellent mechanical strength. HDPE CC52502 does not contain slip agent.

HDPE: CC52502

Characteristic Properties

Narrow MWD HDPE
Excellent organoleptic property
Superior processability and excellent mechanical strength
Good gas permeability characteristics

Density: 0.950 – 0.954

Main Applications

Caps and closures for mineral water bottles,
Caps for sparkling water and carbonated
Soft drinks, beverage caps.

Density: 0.950 – 0.954

Additives

Antioxidants/Acid scavenger

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190°C/ 2.16Kg)

g/10 min

2.1

D1238

Density

g/cm³

0.952

D1505

Thermal Properties

Unit

Value

Test Method

Vicat Softening Point

°C

124

D1525

Molded Properties

Unit

Value

Test Method

Flectural Modulus

Mpa

1000

D790

Tensile Strength at Yield

Mpa

25

D790

Tensile Strength at Break

Mpa

38

D638

H.D.T

°C

78

D648

Notched Izod Impact @ 23 °C

J/m

180

D256/A
LLDPE

HD52505

HDPE made via Spherilene Gas-Phase Technology

52505 is a HDPE copolymer which is manufactured in gas phase process. This grade is an injection molding grade for applications requiring a good physical property even at low temperatures, like pails, containers and technical moldings.

HDPE: HD52505 | HD52505UV

Characteristic Properties

Good physical property even at low temperatures.

Density: 0.950 – 0.954

Main Applications

Caps and closures for mineral water bottles
Caps for sparkling water and carbonated soft drinks, beverage caps.

Density: 0.950 – 0.954

Additives

HD-52505:
Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
HD-52505 UV:
Thermal Antioxidant (Process Stabilizer)
Antiblocking Agent
Catalyst neutralizer (acid scavenger, lubricant)
UV Stabilizer

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190°C/ 2.16Kg)

g/10 min

5

D1238

Density

g/cm³

0.952

D1505

Thermal Properties

Unit

Typical Value

Test Method

Vicat Softening Point

°C

124

D1525

Molded Properties

Unit

Typical Value

Test Method

Flectural Modulus

Mpa

1200

D790

Tensile Strength at Yield

Mpa

27

D638

Tensile Strength at Break

Mpa

13

D638

H.D.T

°C

67

D648

Notched Izod Impact @ 23 °C

J/m

29

D256/A
LLDPE

HD52511 HD52511UV

HDPE made via Spherilene Gas-Phase Technology

52511 is a HDPE copolymer injection molding grade for applications requiring a good balance between physical properties and flowability, like housewares and toys.

HDPE: HD52511 | HD52511UV

Characteristic Properties

Good balance between physical properties and flowability

Density: 0.950-0.954

Main Applications

Injection molding grade
Houseware

Density: 0.950-0.954

Additives

52511:
Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
52511 UV:
Thermal Antioxidant (Process Stabilizer)
Antiblocking Agent
Catalyst neutralizer (acid scavenger)

 

Resin Properties

Unit

Typical Value

ASTM Method

Melt Index (190°C/ 2.16Kg)

g/10 min

11

D1238

Density

g/ml

0.952

D1505

Physical properties @

Flexural modulus

MPa

1200

D709

Notched Izod impact at 23°C

J/m

22

D256/A

Vicat softening point

°C

122

D1525

@ on compression moulded specimen obtained according to ASTM D 1928°C

Fabrication conditions for injection moulding

Recommended barrel temperatures range between 190 and 280°C
LLDPE

LL32604 LL32604UV

LLDPE made via Spherilene

32604 is a LLDPE for rotomolding which manufactured by gas phase process. This grade is suitable for all applications which need a good balance among moldability and mechanical properties together with an exceptional stress cracking resistance.

LLDPE: LL32604 | LL32604 UV

Characteristic Properties

Exellent ESCR.

Density: 0.931 – 0.933

Main Applications

High ESCR rotomolded items
Chemical containers

Density: 0.931 – 0.933

Additives

LL-32604:
Thermal Antioxidant
LL-32604UV:
Thermal Antioxidant
UV Stabilizer
CatalystNeutralizer (Acid Scavenger)

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190°C/ 2.16Kg)

g/10 min

4

D1238

Density

g/cm³

0.932

D1505

Physical Properties

Unit

Typical Value

Test Method

Flectural Modulus

Mpa

1350

D790

Notched Izod Impact @ 23 °C

J/m

NB

D256/A

E.S.C.R

h

>1000

D1693
LLDPE

HD60511 HD60511UV

HDPE made via Spherilene Gas-Phase Technology

60511 is a HDPE injection molding grade which combines excellent flowability with high stiffness. This resin is well suited for housewares and toys applications.

HDPE: HD60511 | HD60511UV

Characteristic Properties

Excellent flowability with high stiffness.

Density: 0.956 – 0.960

Main Applications

Injection molding grade

Density: 0.956 – 0.960

Additives

60511
Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
60511UV
Catalyst neutralizer (acid scavenger, lubricant)
UV Stabilizer

 

 

Resin Properties

Unit

Typical Value

ASTM Method

Melt Index (190°C/ 2.16Kg)

g/10 min

11

D1238

Density

g/ml

0.958

D1505

Physical properties @

Flexural modulus

MPa

1450

D709

Notched Izod impact at 23°C

J/m

21

D256/A

Vicat softening point

°C

125

D1525

@ on compression moulded specimen obtained according to ASTM D 1928°C

Fabrication conditions for injection moulding

Recommended barrel temperatures range between 190 and 280°C
LLDPE

MD3510

MDPE made via Spherilene

MD-3510 is a medium density polyethylene resin (MDPE), 1-butene copolymer, obtained by gas phase technology process. This grade designed for the production of drip irrigation tapes, pipes andmono or coex film applications. In this grade excellentextrusion properties combined with good mechanical properties. MD-3510 can be blended with different PE grades to modify the final properties of the products.

MDPE: MD-3520

Characteristic Properties

Excellent extrusion properties
Good mechanical properties

Density: 0.933 – 0.936

Main Applications

tapes and pipes
Heavy duty film applications
FSS packaging films

Density: 0.933 – 0.936

Additives

Thermal Antioxidant (Process Stabilizer)
Catalyst neutralizer (acid scavenger, lubricant)
Anti UV
PPA

 

Resin Properties

Unit

Typical Value

Test Method

Melt Index (190 °C / 2.16Kg)

g/10 min

0.4

D1238

Density

g/cm3

0.935

D1505

Thermal properties @

Vicat Softening Point

°C

120

D1525

Melting Point

°C

130

D3418

Mechanical Properties @

Flexural modulus

MPa

640

D790

Tensile Strength at Yield

MPa

18

D638

Tensile Strength at Break

MPa

27

D638

Tensile Elongation at Break

%

>800

D638

Notched Izod Impact @ 23 °C

j/m

700

D256/A

Hardness

Shore D

61

D2240

ESCR

hr

>1000

1693

Oncompression molded according to ASTM D1928C

Mr.Andrew NEAVES - Director

Write Us

    Orchard Management © Copyright 2025 All Rights Reserved

    • +447429537935

    • info@orchardmsltd.com

    • 2 Church View Provender Lane, Norton,Faversham, Kent, England, ME13 0SN United Kingdom

    • Mo-Fri: 8am - 6pm
      Sat: 9am - 6pm
      Sun: off